Jefferson College

You are here

Construction Trades

Electrical Courses

Electricians

Jefferson County tradesmen are required to earn a total of 12 Professional Education Units (PEUs) every 3 years. We offer a wide variety of courses for each trade. If you require assistance with course advising or registration, you may contact the Continuing Education Office at: (636) 481-3144.

Here is a list of some of the approved courses as approved by the Jefferson County Department of County Services and Code Enforcement
Jefferson College Approved Courses

The courses are approved by the Jefferson County Code Enforcement Office and St Louis County. Here is a link to the approved courses for St. Louis County
Approved Contractor PEU Course List

The Continuing Education
Department at Jefferson
College in partnership
with the Jefferson County
Building Commission is
pleased to offer courses
for our area tradesmen,
which satisfy their ongoing
Professional Education
Unit (PEU) requirement.
A total of 1 (PEU) is
awarded for every 2 
course contact hours.

Trades Included are:

  • Electricians
  • HVAC
  • Pipe Fitters
  • Plumbers 

 

**Check out our Construction Trades Brochure for more information!

NOTE: To ensure proper credits for Online Courses, you MUST
contact the Continuing Education office to register with us.

 

We are pleased to announce our NEW Online Training Partner, JADE Learning. This online partner features many of the most sought after online training courses for Electricians and Engineers. Simply click on the links below for more information on each course listing. For additional assistance you can review the Step by Step Course Enrollment Guide by clicking here:

JADE Learning Course Enrollment Guide

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

HVAC Courses

HVAC

 

HVAC Mechanical Code

This course is designed for HVAC professionals with an emphasis on the mechanical code and meets the requirement for professional development for HVAC contractors. Many municipalities require someone licensed to install equipment which requires advanced skills, knowledge, and experience to install correctly. Permits are required and only a licensed HVAC or Electrical master can apply for the permits in some jurisdictions. The following is a general overview of the mechanical code and what it covers for safe and proper installation of HVAC air conditioning and heating equipment.

HVAC Mechanical Code Overview

  • Mechanical Code Administration
  • Basic Installation of Mechanical Equipment

Ventilation Code Overview – Ventilation

  • Exhaust Systems
  • Duct Systems
  • Combustion Air
  • Chimneys and Vents
  • Special Appliances, Fireplaces, and Solid Fuel Burning Appliances

Boiler Code Overview – Boilers 

  • Water Heaters
  • Pressure Vessels

Refrigeration Code Overview – Refrigeration

  • Hydronic Piping
  • Fuel Oil Piping and Storage
  • Solar Systems

HVAC Mechanical Codes
(PD3-967)
                                                      

Section: 0
Day/Date/Time:  November 19, 20, 26, 28,(6:00 - 10:00 pm)
December 1, (8:00 am - 4:00 pm)                   
Sessions: 5
Instructor: Bill Kaune 
Location: Career & Technical Education Bldg, Room 110
Fee: $299 
CRN#
                                               

Section: 1
Day/Date/Time: TBD Please Call for Details                         
Sessions:
Instructor: Bill Kaune 
Location: Career & Technical Education Bldg., Room 110
Fee: $299 
CRN#

NOTE: This course is worth 24 Contact Hours and a total of 12 PEUs (Professional Education Units), as approved by the Jefferson Country Code Enforcement Board. 

Fuel Gas Codes and Pipe Sizing 
(PD3-986)

The Fuel Gas Codes and Pipe Sizing course is based on the International Fuel Gas Code, and is intended for HVAC professionals who install and service heating systems and appliances. The course will cover administration and code enforcement, general regulations, sizing, installations, chimneys, vents, specific appliances, and gaseous hydrogen systems. This course will cover the most current code updates, and is approved by the Jefferson County Code Enforcement Commission, for PEU (Professional Education Units) credit, which will count toward the required 12 PEUs per licensing cycle.

Section: 0 
Day/Date/Time: November 1, 5, 7 (6:00 - 10:00 pm)   
Sessions: 3 
Fee: $159
Instructor: William Kaune 
Location: Career & Technical Education Bldg., Room 110
CRN#

NOTE: This course is worth 12 Contact Hours and a total of 6 PEUs (Professional Education Units), as approved by the Jefferson Country Code Enforcement Commission. 

**Required materials: 2018 International Fuel Gas Code Book ISBN 978-1-60983-741-9

Meet Your Instructor:  Bill Kaune
Director, Jefferson College HVAC Program
 

Bill Kaune is a    1976 graduate of Jefferson College. He worked for Laclede Gas for thirty-three years; first as a commercial service technician, and ten years as a supervisor. Mr. Kaune began teaching at Jefferson College in 2000 as an adjunct instructor, and became a full-time instructor in 2010. In the past four years, he has initiated many new courses and modified existing ones to meet industry demands. His HVAC Program was awarded the HVAC Excellence Accreditation in 2013.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Online HVAC Courses: Online Course Provider:

HVAC Equipment and Systems:
Small Office Buildings

HVAC & R Controls

 

HVAC Systems and Control Fundamentals

HVAC Technician Fundamentals

HVAC Technician Career Prep

HVAC Technician

 

   Career Training 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Plumbing, Drainlaying, Lawn Irrigation & Sprinklerfitting Courses
 
Jefferson College is pleased to announce the addition of our NEW Jefferson County Code Enforcement Board-Approved course offerings for area Plumbers, Lawn Irrigation Professionals, Drainlayers, and Sprinklerfitters. These courses are approved to meet the PEU requirements by the Jefferson County Code Enforcement Board.      NOTE: Not all of these courses are approved for ALL of the plumbing related trades. Exceptions will be noted under the course content.
 

Plumbing Code Review 
(Part 1 - 2012 Code)
Section: 0
Day/Date/Time: Sept. 11, 2018
5:00-9:00 pm
Sessions: 1
Instructor: Charles Redecker
Location: JCA, Room 325
Fee: $59
CRN# 27012

Plumbing Code Review
(Part 2 - 2015 Code)
Section: 1
Day/Date/Time: Sept 13, 2018
5:00-9:00 pm
Sessions: 1
Instructor: Charles Redecker 
Location: JCA, Room 325 
Fee: $59 
CRN# 27013

 

Plumbing Code Review 
(Part 1 - 2012 Code)
Section: 2
Day/Date/Time: Oct. 8
5:00-9:00 pm
Sessions: 1
Instructor: Charles Redecker
Location: JCA, Room 325
Fee: $59
CRN# 27016

Plumbing Code Review
(Part 2 - 2015 Code)
Section: 3
Day/Date/Time: October 10, 2018
5:00-9:00 pm
Sessions: 1
Instructor: Charles Redecker 
Location: JCA, Room 325 
Fee: $59 
CRN# 27019

 

(PD4-980)

Plumbing Codes Review

This course will explain the sections of the  International Plumbing Code and what sections of the code to look up for specific answers to ensure code standards. We will review the Jefferson County amendments and how they affect plumbing installations. 

This course has been approved by the Jefferson County Code Enforcement Board as a CODE course worth 2.0 PEUs toward the current license cycle for Plumbers, Drainlayers, and Lawn Irrigation Professionals.

Required Course Materials: 

International Plumbing Code Book

Jefferson County Code Amendments 

 

*Note: This is a two-part course, and students must enroll in BOTH parts to get a full 8 hours of credit, worth 4 PEUs.

Plumbing Estimation*

(PD4-982) 

This course will explain how to successfully estimate drain, waste, and vent water systems. This course will also focus on obtaining material take off and on how to put together a successful bid proposal and prepare a contract.

NOTE: This course has been approved by the Jefferson County Code Enforcement Board and is designated as an ELECTIVE course, worth 2.0 PEUs toward the current licensing cycle for Plumbers, Drainlayers, and Lawn Irrigation Professionals. 

Section: 0 
Day/Date/Time: Sept. 25, 2018
5:00 - 9:00 pm
Instructor: Charles Redecker
Sessions: 1
Location: Jefferson College Arnold, Room 325
Fee: $59
CRN# 27010

Section: 1
Day/Date/Time: October 15, 2018
5:00 - 9:00 pm
Instructor: Charles Redecker
Sessions: 1
Location: Jefferson College Arnold, Room 325
Fee: $59
CRN# 27019

Section: 2
Day/Date/Time: October 24, 2018
5:00 - 9:00 pm
Instructor: Charles Redecker
Sessions: 1
Location: Jefferson College Arnold, Room 325
Fee: $59
CRN#

Section: 3
Day/Date/Time: TBD Please Call for Details
Instructor: Charles Redecker
Sessions: 1
Location: Jefferson College Arnold, Room 325
Fee: $59
CRN#

 

Plumbing Blue Print Reading*
(PD4-981)

This course will explain how to successfully interpret plumbing drainage and water distribution systems with a focus on material take off and how to make and understand isometric drawings.  *NOTE: This course has been approved by the Jefferson County Code Enforcement Board as a CODE course worth 2.0 PEUs toward the current license cycle for Plumbers, Drainlayers, Sprinklerfitters, and Lawn Irrigation Professionals.

Section: 0
Day/Date/Time: Sept. 18, 2018
5:00 - 9:00 pm
Instructor: Charles Redecker
Location: Jefferson College Arnold, Room 325
Fee: $59
CRN# 27006

Section:
Day/Date/Time: October 1, 2018
5:00 - 9:00 pm
Instructor: Charles Redecker
Location: Jefferson College Arnold, Room 325
Fee: $59
CRN# 27014

 

Plumbing: Backflow Prevention
(PD4-987)

We will discuss the degree of hazards per prevention class.
We will explain the operation of the vacuum breaker, pressure
vacuum, and double check and reduced principle backflow
preventer. We will study the State of Missouri Backflow
Regulations, and explain the American Society of Sanitary
Engineers (ASSE) regulations and requirements for backflow
design and installation. This course does not include any 
hands-on, but rather theory understanding only.

NOTE: This course has been approved by the Jefferson County Code Enforcement Board and is designated as a CODE course, worth 2.0 PEUs toward the current licensing cycle for Plumbers.

Section: 0
Day/Date/Time: October 22, 2018
5:00 - 9:00 pm
Instructor: Charles Redecker
Sessions: 1
Location: Jefferson College Arnold, Room 325
Fee: $59
CRN# 27024

Section: 1
Day/Date/Time: TBD Call for details
Instructor: Charles Redecker
Sessions: 1
Location: Jefferson College Arnold, Room 325
Fee: $59

CRN#*

 

Plumbing Mathematics
(PD4-988)

We will learn how to use formulas for computing pipe angle
measurements. We will compute decimals, fractions, water
pressure, melting points, pipe and fitting data and threaded pipe take off and cutting. Students will need to bring a small
calculator, paper and pencil for working on math calculations.

NOTE: This course has been approved by the Jefferson County Code Enforcement Board and is designated as an ELECTIVE course, worth 2.0 PEUs toward the current licensing cycle for Plumbers.

Section: 1
Day/Date/Time: Sept. 20, 2018
5:00 - 9:00 pm
Instructor: Charles Redecker
Sessions: 1
Location: Jefferson College Arnold, Room 325
Fee: $59
CRN# 27022

Section: 0
Day/Date/Time: Oct. 3, 2018
5:00 - 9:00 pm
Instructor: Charles Redecker
Sessions: 1
Location: Jefferson College Arnold, Room 325
Fee: $59
CRN# 27023

Business of Plumbing
(PD4-989) 

This course will focus on the requirements to start a plumbing
company and how to choose the area of work that you want
to do such as; commercial or residential. Also, how to 
understand a profit/loss statement, and how to negotiate with
vendors. In addition, the course will discuss whether to buy,
rent, or lease equipment; as well as marketing and advertising
for your company, and processing collections. 

NOTE: This course has been approved by the Jefferson County Code Enforcement Board and is designated as an ELECTIVE course, worth 2.0 PEUs toward the current licensing cycle for Plumbers,

Section: 1
Day/Date/Time: Sept. 27, 2018
5:00 - 9:00 pm
Instructor: Charles Redecker
Sessions: 1
Location: Jefferson College Arnold, Room 325
Fee: $59
CRN# 27005

Section: 0
Day/Date/Time: Oct. 17, 2018
5:00 - 9:00 pm
Instructor: Charles Redecker
Sessions: 1
Location: Jefferson College Arnold, Room 325
Fee: $59
CRN# 27021

Plumbing Backflow Prevention Training and Certification Program

Backflow Prevention Assembly Tester Training
and Certification Examination (ASSE)

Length: 40 hours

 

Plumbing Backflow Prevention Training Certification Flyer

At this forty (40) hour training class, participants will be presented with the guidelines used for acceptable practices of testing backflow prevention assemblies. The participants will also learn the principles of cross-connection control and the methods devices, and assemblies used to protect the potable water system. The training and knowledge provided will prepare the student for the jurisdiction’s recognized examination. On the final day of the training, the ASSE 5110 tester certification examination will be administered. The written exam for an initial tester certification consists of 100 questions (and) certification candidate must demonstrate the field test procedure for a reduced pressure principle assembly, double check valve assembly, pressure vacuum breaker assembly, and spill resistant vacuum breaker assembly.

SECTION: 1

DAY/DATE/TIME:
September 10 (5:00-9:00 pm)
September 12 (5:00-9:00 pm)
September 17 (5:00-9:00 pm)
September 19 (5:00-9:00 pm)
September 20 (5:00-9:00 pm)
September 24 (5:00-9:00 pm)
September 26 (5:00-9:00 pm)
September 27 (5:00-9:00 pm)
October 6 (8:00 am – 4:00 pm)

LOCATION: Hillsboro ATS Building Repair Classroom SESSIONS: 9
INSTRUCTOR: Charles Redecker
FEE: $649
CRN:

*The Backflow Prevention Reference Manual (Third Edition) is the required text for this course.

 

Backflow Prevention Assembly Tester Recertification Training and Examination (ASSE 5110)

Length: 8 hours

During this eight (8) hour training, participants will review the guidelines used for acceptable practices of testing backflow prevention assemblies. The participants will receive the information and skills to help them pass the American Society of Sanitary Engineering (ASSE) Recertification Examination. At the end of the course the recertification examination will be administered. This consists of a written and a hands-on examination. This training is mandatory in order for the tester to re-certify under ASSE program guidelines. The written exam for the tester recertification consists of 25 questions. In the practical examination the candidate must demonstrate the proper field test procedure for a reduced pressure principle assembly, double check valve assembly, pressure vacuum breaker assembly. This class is to re-certify those
 who were previously certified to perform the inspection of cross
connection control and backflow prevention systems. 
Certification cannot be more than 6 months expired.
Provide a copy of your certification card which will be submitted
to ASSE upon completion of the course and exam.

SECTION: 1

DAY/DATE/TIME:
October 6 (8:00 am – 4:00 pm)
LOCATION: Hillsboro ATS Building Repair Classroom
SESSIONS: 1
INSTRUCTOR: Charles Redecker
FEE: $395:
CRN:

 

Meet Your Instructor:  Charles Redecker

We are pleased to introduce our new instructor, Charles Redecker. He comes to us with vast experience and a great deal of specialized training with multiple certifications crossing numerous disciplines. Charles will be instructing our Plumbing, Drainlaying, Sprinklerfitter and Lawn Irrigation courses. His impressive credentials and experience are outlined below.

 

Education:

 June 1969 – June 1973
     O’ Fallon Technical Plumbing Training

July 1973 – November 1979    
     Plumbers Local 35 / Infield Training /
     Plumbing / Professional Management Training

 

Master Plumber / Drainlayer in  Missouri and Illinois Certified Backflow Preventor Instructor, Installer, and Tester Associates Degree in Mechanical Engineering
Certified Arch, Mig, Tig Gas and Electric Arc Welding
Certified to Teach Blueprint Reading / Interpretation Experienced Lead Pipe / Wiping Installer

 

Certified to Teach Adult Education

1.  St. Louis County Special School District Heating and Cooling & Electrical
 

2.  Ranken Technical College Master Instructor Plumbing/ Pipefitting/ General  Construction
 

3. Independent Plumbing Contractors Association - Teaching Plumbing Apprenticeship through the United States Department of Labor
 

4. Associated Builders & Contractors– Currently Teaching Developed and Designed Training Programs  for; Plumbing / Pipefitting / Backflow Prevention / Code Study / Continuing Education Units Certified by the State of Missouri and by the North Central American College

 

Water Softener Installation / Repair

Experienced with a Backhoe / Skidsteer / Bobcat / Heavy Equipment
Class A Driver’s License with Endorsements
Certification in Management: Start, Improve, and Control Service Work with Motivation to Maximize Employee Performance and Potential
O.S.H.A. Certified Member of the American Society of Sanitary Engineers -#4180
Member of the Missouri Smallflows Organization
Member of the Illinois Association of Groundwater Professionals
Member of the International Association of Plumbing & Mechanical Officials -#96844

Member of the ABC Construction Organization – Professional Instructor Plumbing St. Louis

Vice-President and Founding Member of the Independent Plumbing Contractors Association

Professional Case Consultant to the Dubail Judge Law Firm

 

Other Courses:

 

Advertising
Marketing Research
Business Law
Sales Managment
Business Communications
Money & Banking
Inventory Control
Government & Business
Accounting/ Profit & Loss Statements
Electrical Heating & Cooling
General Management

 

Charles has also completed several courses with Success International Academy:

1. Technician Training, Sales, Straight Forward Pricing.

2. Repairs vs. Replacement.

3. Drain Cleaning Service Training.

4. Train the Trainer; both with the NCCER and PSI.

5. Water Softener and Water Heater – Train the Trainer.

6. Completion of the Phoenix Program – This is the Jim Abrams book and workbook “Guide to Contractors Greatness”. This course included monthly meetings with several contractors sharing ideas and business practices. 

 

Licenses Retained:

 

St. Louis County Master Plumber - #P5253
St. Louis County Master Drainlayer  - #D6259
St. Louis County Mechanical Contractors - #MCC-X0063
St. Louis City Master Plumber / Drainlayer - #112
St. Charles City Master Plumber / Drainlayer
St. Charles County Master Plumber - #P3393A
St. Charles County Master Drainlayer - #D6244
Jefferson County Missouri Master Plumber - #007
Jefferson County Missouri Master Drainlayer - #007
Jefferson County Missouri Irrigation Sprinklers- #007

The State of Illinois Master Plumber - #058-102518

The State of Illinois Water Well Pump Installation Contractors  -#101-809838

State of Missouri Backflow for ASSE - #083894

State Of Missouri Advanced On-Site Water / Septic Tank Systems - #34125

Track Pipe Endorsement Certification - #1138503

Lead Renovation Certified- #R-L-19605-10-00012

OSHA Certified

Tub and Shower/ Fixture Resurface Certified

CDL A Commercial Drivers License

Master Estimator

Master Trainer / Motivator

National Center for Construction Education and Research, as an instructor and principal.

Master Plumber Kansas City Missouri with gas certification #205302

 

CE Schedule

Click this image to view the
BWD/CE Schedule in PDF Format.

NEW! BWD/CE Schedule

CE Registration Info

By Phone:  
MasterCard/VISA, and Discover only.  
Call (636) 481-3144.
TDD users call (636) 789-5772.
    
By Mail: 
Fill out and print Registration
Form
 (page 31) and mail to:


ENROLL, Jefferson College Arnold
1687 Missouri State Road
Arnold, MO 63010*
*Registration is not complete
until payment is received
 
In Person:
Jefferson College Arnold
Room 330 (Main Office)
Monday-Thursday, 8 am - 4:30 pm
Friday, 8 am - 11:30 am
 
By FAX: 
MasterCard/VISA only
(636) 287-9084
    
By E-Mail:  
MasterCard/VISA or Discover,
only:  EnrollCE@jeffco.edu


This e-mail address is being
protected from spam bots
you need JavaScript enabled
to view it 

CE Registration Form